Alternate P/N : D1009276
You can submit the RFQ form below for Part Number D10-09-276, Resistor Variable Wire Wound Pre by Manufacturer Bowmar Tic Inc with NSN 5905004182452. Please ensure that all information is appropriately filled. These answers will help us offer you a better service.
Aviation Orbit, an ASAP Semiconductor company, is a leading distributor of Bowmar Tic Inc and obsolete NSN parts such as D10-09-276. We support defense/military, aerospace, commercial and industrial clients by supplying essential NSN parts at competitive prices.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-418-2452 Item Description: Resistor Variable Wire Wound Pre | 5905 | 004182452 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| D10-09-276 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.430 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.595 INCHES MINIMUM AND 0.655 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.775 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.065 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3528.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 1.50 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.003 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 100.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.075/+0.075 2ND SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 7TH SECONDARY FINISH |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 7TH SECONDARY PATTERN |
| CRGM | FUNCTION CONFORMITY PER SECTION | 2ND SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 5 2ND SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 2ND SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 1ST SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 8 OCLOCK 11TH PRIMARY |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 9 OCLOCK ALL PRIMARIES |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 07217-629892 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 11 TURRET |
Semiconductor's Certifications and Memberships
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
We Hope You Choose Us as Your Low-Price, High-Quality Parts Distributor In the Future.
Request for Quote
