Part Number : WRA1M024S254U
Manufacturer : Clarostat Sensors And Controls
NSN : 5905-01-348-7084 (5905013487084)
FSG : 59 Electrical and Electronic Equipment Components
NIIN : 01-348-7084 (013487084)
Country : USA
Submit your RFQ below for Clarostat Sensors And Controls Part WRA1M024S254U, a high-quality Resistor Variable Nonwire Wound with NSN 5905013487084. Aviation Orbit provides a fast and reliable procurement solution for this part WRA1M024S254U, sourced directly from Clarostat Sensors And Controls (CAGE Code: 12697). The NSN 5905013487084 classifies this item under FSG 59 Electrical and Electronic Equipment Components and FSC 5905 Resistors, ensuring compliance with military and aviation standards.
For further identification, the NIIN 01-348-7084 confirms an NCB of 01 (origin: USA), while the INC 37405 provides additional classification details. Aviation Orbit streamlines the purchasing process, offering competitive pricing and dependable sourcing for Clarostat Sensors And Controls components. Submit your RFQ today for a quick response and seamless procurement experience.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-348-7084 Item Description: Resistor Variable Nonwire Wound | 5905 | 013487084 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Wra1m024s254u | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABXF | SHAFT LENGTH | 0.375 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 290.0 MINIMUM AND 300.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 32.00 INCH-OUNCES |
| AEFN | NONTURN DEVICE LOCATION | AT 10'30 OCLOCK |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | LOCKING BUSHING |
| CBME | III CUBIC MEASURE | 0.083 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 250.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 290.0 MINIMUM AND 300.0 MAXIMUM |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | +0.0 TO 8.0 -55 DEG CELSIUS SINGLE SECTION AND +0.0 TO 6.0 -40 DEG CELSIUS SINGLE SECTION AND +0.0 TO 2.5 0 DEG CELSIUS SINGLE SECTION AND -3.5 TO 3.5 85 DEG CELSIUS SINGLE SECTION AND -6.0 TO 6.0 120 DEG CELSIUS SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| FEAT | SPECIAL FEATURES | TERMINAL LUGS EXITING THE SIDE OF THE PART BODY RATHER THAN THE END |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| ABPM | BODY DIAMETER | 0.500 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.422 INCHES MAXIMUM |
| AEFP | NONTURN DEVICE RADIUS | 0.245 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 13499-238-0005 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
Semiconductor's Certifications and Memberships
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
We Hope You Choose Us as Your Low-Price, High-Quality Parts Distributor In the Future.
Request for Quote
