Part Number : J264B0100DC
Manufacturer : General Electric Company
NSN : 4720-00-481-1554
(4720004811554)
You can submit the RFQ form below for Part Number J264B0100DC, Hose Assembly Nonmetallic by Manufacturer General Electric Company with NSN 4720004811554. Please ensure that all information is appropriately filled. These answers will help us offer you a better service.
Aviation Orbit, an ASAP Semiconductor company, is a leading distributor of General Electric Company and obsolete NSN parts such as J264B0100DC. We support defense/military, aerospace, commercial and industrial clients by supplying essential NSN parts at competitive prices.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 2B 1ST END" |
| AAJD | THREAD CLASS | 2B 2ND END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END" |
| AARX | INSIDE DIAMETER | 0.173 INCHES NOMINAL" |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.330 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES" |
| ADJS | EXTERIOR COLOR | NATURAL" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END" |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END" |
| CQBD | BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END" |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 2ND END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND CORROSION RESISTANT" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 9.875 INCHES MINIMUM WORKING AND 10.125 INCHES MAXIMUM WORKING" |
| FEAT | SPECIAL FEATURES | SAFETY WIRE HOLES AND CHAFING GUARD" |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 2B 1ST END" |
| AAJD | THREAD CLASS | 2B 2ND END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END" |
| AARX | INSIDE DIAMETER | 0.173 INCHES NOMINAL" |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.330 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES" |
| ADJS | EXTERIOR COLOR | NATURAL" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END" |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END" |
| CQBD | BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END" |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 2ND END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND CORROSION RESISTANT" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 9.875 INCHES MINIMUM WORKING AND 10.125 INCHES MAXIMUM WORKING" |
| FEAT | SPECIAL FEATURES | SAFETY WIRE HOLES AND CHAFING GUARD" |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END" |
Semiconductor's Certifications and Memberships
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
We Hope You Choose Us as Your Low-Price, High-Quality Parts Distributor In the Future.
Request for Quote
