You can submit the RFQ form below for Part Number 194D, Mortiser Hollow Chisel Horizonta by Manufacturer Oliver Machinery Co with NSN 3220013728676. Please ensure that all information is appropriately filled. These answers will help us offer you a better service.
Aviation Orbit, an ASAP Semiconductor company, is a leading distributor of Oliver Machinery Co and obsolete NSN parts such as 194D. We support defense/military, aerospace, commercial and industrial clients by supplying essential NSN parts at competitive prices.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3220-01-372-8676 Item Description: Mortiser Hollow Chisel Horizonta | 3220 | 013728676 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 194d | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AMWX | FEED METHOD | HAND |
| ELEC | VOLTAGE IN VOLTS | 115.0 |
| FAAZ | PHASE | SINGLE |
| AKYN | FURNISHED ITEMS AND QUANTITY | MAGNETIC CONTROL 1; TABLE CLAMP 1 |
| ASQQ | HORSEPOWER RATING | 1.00 |
| BCRH | SPINDLE QUANTITY | 1 |
| BCRQ | MAXIMUM DISTANCE FROM FENCE TO CHISEL CENTER | 4.000 INCHES |
| FEAT | SPECIAL FEATURES | TABLE CAN BE LOWERED BY MEANS OF A HANDWHEEL AND SCREW,TO PERMIT MORTISING IN THE EDGE OF STOCK 7 UP TO 20 IN. WIDE WHEN USING THE TABLE. THE TABLE KNEE,WITH THE TABLE ATTACHED,CAN BE REMOVED FROM THE MACHINE IN FIVE MINUTES. WITH THE TABLE REMOVED THE MACHINE WILL MORTISE IN THE END OF STOCK UP TO 32 IN. WIDE. TABLE TRAVEL IS 9 IN. HORIZONTALLY. THE MOTOR HEAD SLIDES ON V-WAYS SCRAPED TO CLOSE TOLERANCES,AFTER ACCURATE PLANING. THE WAYS HAVE GIBS WITH SET SCREWS TO TAKE UP POSSIBLE FUTURE WEAR. THREE SLIDES ARE LOCATED ON THE VERTICAL WAYS. THE MOTOR IS CARRIES ON ONE SLIDE; THE M9OTOR IS EQUIPPED WITH TRUST BALL BEARING TO HANDLE THRUST OF THE BIT; MOTOR IS 3600 RPM |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ATJK | POWER SOURCE | ELECTRIC MOTOR |
| ACDC | CURRENT TYPE | AC |
| ARDQ | TABLE LENGTH | 28.000 INCHES NOMINAL |
| BCRL | MAXIMUM CHISEL SIZE ACCOMMODATED | 0.375 INCHES |
| BCRP | MAXIMUM DISTANCE FROM TABLE TO HORIZONTAL CHISEL CENTERLINE | 20.000 INCHES |
Semiconductor's Certifications and Memberships
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
We Hope You Choose Us as Your Low-Price, High-Quality Parts Distributor In the Future.
Request for Quote
